ISOL-8 The Connect Controller

Sale price825,00 €

Isol-8 Connect System

A versatile modular sequential mains distribution and conditioning system tailored for complex installations.

Connect Controller Front.jpg

The Isol-8 Connect system

There are two elements to the system. The Connect Controller provides sequential power up and down control signals for up to four Connect Slave units which remotely condition and switch mains power. The system's reach can be expanded even further when using the comprehensive serial interface to daisy chain or parallel slaves via additional controllers. Together they allow a system to be powered up and down from one place for ease of use, reducing switch on surges and unwanted tripping whilst eliminating the standby power used by the individual appliances. The powerful filters in the slave modules keep power free from mains noise, allowing the installation to deliver maximum performance at all times. The system is designed and built to flexible, robust and reliable for total peace of mind.

The Connect Controller

The Connect Controller can sequence or switch eight channels. A choice of front panel switch, opto isolated control voltage or dry contact closure initiates on or off sequence, all conveniently packaged within a quality 1U enclosure.

Connect Controller Rear.jpg

Sequence on or off plus combinations of individual channels can all be addressed via the RS232 serial port (RS422/485 available as an option). The controller can be assigned one of thirteen addresses or sit in parallel with another controller on the same address, giving huge control flexibility. Control cabling is by standard RJ45 connectors allowing quick and easy configuration.

CONTROLLER SPECIFICATION

\n Number of control channels: 8 \n Number of control outputs: 4 \n Control Output Specification Proprietary compatible only with Slave \n Control Output connector RJ45 \n External Control Inputs 1/4' Mono female jack (dry contact) \n9 way D socket (Serial control and opto isolated control voltage)\n Standard Mains Inlet: 20A Neutrik PowerCon \n Dimensions: 1U 19 inch rack mount \n482 x 44 x 159mm (W x H x D) inc connectors\n Product Weight: 2.5Kg \n Construction: Steel chassis, aluminium front panel. \n Mains Voltage: 230VAC (EU versions) \n Power Consumption: 15 Watt maximum \n Standby Power Below 1 Watt \n","resolvedBy":"manual","resolved":true}" data-block-type="22">
Number of control channels: 8
Number of control outputs: 4
Control Output Specification Proprietary compatible only with Slave
Control Output connector RJ45
External Control Inputs 1/4" Mono female jack (dry contact)
9 way D socket (Serial control and opto isolated control voltage)
Standard Mains Inlet: 20A Neutrik PowerCon
Dimensions: 1U 19 inch rack mount
482 x 44 x 159mm (W x H x D) inc connectors
Product Weight: 2.5Kg
Construction: Steel chassis, aluminium front panel.
Mains Voltage: 230VAC (EU versions)
Power Consumption: 15 Watt maximum
Standby Power Below 1 Watt